Products

Import Products

Hot Rolled Steel Coils

Material: RST. 37/2 According to DIN 17100-Coil Width 1000+20/-0MM.
Mill Edge with 700-750 MM. Inner Diameter-Weight 5.5-8.0 Tons.
Thickness Range 1.0-8MM, Tolerance in Thickness, Dimension and Form according to DIN 1016.

Cold Rolled Steel Coils

Material: RST. 12 According to DIN 1623, Tolerance to DIN 1541, Annealed Pickled and Oiled - Cut Edge - with 450-500MM, Inner Diameter.
Weight 4.5-6.0 Tons.
Thickness Range 0.7-2.5MM, Width 1000MM.

Hot Rolled Steel Plates

Material: RST. 37/2 According to DIN 17100, Tolerance to DIN 1543, Thickness Range 10-50 MM, Length up to 9 MTR.
Width 1250 & 1500 MM, Weight per plate 1.8 Ton (Maximum).


Hot Rolled Steel Checker Plates

Material: RST. 37/2 According to DIN 17100,plate one side of which show a regular Embossed plattern with high 0.7MM Min. The other side has Smooth surface, Thickness: 3,4,5,6MM.
Width 1020+/-0MM length up to 9MTR.
Weight bundles from 2.5 to 3.0TON.

Hot Dip Galvanized Coils

HDG produced according to JIS G 3302 SGCC G 60, Regular Spangle, Chromatid, Unoiled.





Deformed Steel Rebars

RST. According to DIN 17100:1980, 1.00x1219mm(Min. producible thickness is 1.20mm) 1.15x1219mm(Min. producible thickness is 1.20mm)

15.0x2438x1219mm(Max. producible thickness is 12.70mm) 20.0x2438x1219mm(Max. producible thickness is 12.70mm)

Dimension Tolerances Thickness: <2.00mm(+0.05mm/0.15mm) >2.00-4mm(+0.06mm/-0.19mm) >4mm(+0.10mm/-0-20mm)

Width Tolerance:(-0/+20mm)

Export Products

Medium Section
A) Steel Equal Angles: Material: RST. 44/2 DIN 17100 Tolerance to DIN 1028/1994
50x50x5MM-60x60x6MM | 70x70x7MM-75x75x8MM
80x80x8MM-90x90x9MM | 100x100x10MM-120x120x12MM

B) Beams:
UPN: Material: RST. 44/2 DIN 17100, Tolerance to DIN 1026/1970 Dimension: 80,100&120MM.


Heavy Section
A) Steel Equal Angles: Material: RST. 44/2 DIN 17100 | Tolerance to DIN 1028/1994 | 120x120x12MM-150x150x15MM
B) Beams: UPN: Material: RST. 44/2 DIN 17100,Tolerance to DIN 1026/1970, Dimension: 140,160,200&260MM.
HEA,HEB: Material: RST 44/2 DIN 17100 Tolerance to DIN 1025/1994, Dimension: 160,180&200 mm
IPE: Material: RST. 44/2 DIN 17100 Tolerance to DIN 1025/1963 Dimension:
140,160,200,240,270,300,360&400MM
For All Profiles: Length: up to 15MTR-Packing: in bundles about 3.5 Tons.
During packing (with width tolerances ACC to En 10051),oiled,DC01, Surface A, Coil Weight Max. 24 MT, Coil ID 508 MM, Packed in MILL’s Standard Export sea worthy packing.
Cold Rolled Steel Coils

Material: RST. 12 According to DIN 1623,Tolerance to DIN 1541,
Annealed Pickled & Oiled-Cut Edge- with 450-500MM inner diameter. Weight 4.5-6.0 Tons, Thickness range 0.5-2.5MM - Width 1000MM. Material: Produced according to EN 10130, Tolerance according to EN 10130 without Edge trimming.
During Picking (width tolerances Acc. to EN 10051), Oiled, DC01, Surface A, Coil Weight Max. 24MT, Coil ID 508MM, Packed in MILL’s standard Export sea worthy packing.

Cold Rolled Steel Sheets

Material: RST. 12 According to DIN1623. | Tolerance to DIN 1541. Annealed, Pickled &Oiled . Thickness Range0.7-2.5MM.
Length 2MTR - Width1000MM.
Surface Quality (For C.R Steel Coils & Sheets): Skin Lamination: up to 5MM in width. Temper color: up to 100MM along both edges. Under Pickling: Scale Pattern acceptable.
Waviness: one wave per meter length. Scratch & roll Marks: not exceeding the thickness tolerance.

Hot Rolled Steel Sheets

Material: RST. 37/2 According to DIN 17100.

Tolerance to DIN 1543. Thickness Range 2.3-8MM.Length 2-6MTR - Width 1020+20/-0MM.

Billets

Material: RST. 37/2 According to DIN 17100.

Tolerance to DIN 1014-1978.

Dimension: 80x80MM. Length 6&12 MTR (Rolled).

Dimension: 130x130MM. Length up to 8.5MTR(Concast).

Dimension: 150x150MM. Length up to 8.5MTR (Concast).

Dimension: 200x200MM. Length up to 6.0MTR (Concast).

Hot Rolled Steel Checker Pates

Material: RST. 37/2 According to DIN 17100. Plate one side of which show a regular Embossed plattern with high 0.7 MM Min., the other side has smooth surface, Thickness: 3,4,5,6MM Width 1020+/-0MM length up to 9MTR.

Weight bundles from 2.5 to 3.0 TON.

Wire Rod

According to AISI 1006&1008 With

diameter ranging from 5.5MM to 14MM.

Wire dimensions and tolerances and ovality satisy all products standard tolerances.

Hot Dip Galvanized Coils

HDG produced According to JIS G 3302 SGCC G 60, Regular spangle, Chromatid, unoiled.


Hot Rolled Steel Coils

Material: RST. 37/2 According to DIN 17100-Coil width 1000+20/-0MM. Mill Edge with 700-750MM. Inner Diameter Weight 5.5-8.0Tons. Thickness range 1.0-8MM, Tolerance in thickness, Dimension and form, according toDIN1016.

Hot Rolled Steel Plates

Material: RST. 37/2 According to DIN 17100.
Tolerance to DIN 1543. Thickness Range 10-50MM. Length up to 9MTR - Width 1250&1500MM. Plate with thickness less than 25 sheared cut weight
per plate 1.8 Ton (max.).

Burkani Slabs

Burkani Rockwool Slabs (Panels) are formed from Rockwool fibers bonded with resistance thermosetting binder (Phenol formaldehyde) to meet the requirements of the American standard (ASTM C 612). Burkani Slabs are produced with various thickness and densities, can be faced with several tubes of facing materials to meet the requirements of the purpose of applications.

Burkani Slabs are used for thermo – acoustic insulation purposes and fire proofing system mainly in construction sector.

Burkani Blankets

Burkani Rockwool Blankets are flexible rolls formed from Rockwool fibers, slightly bonded with heat resistant thermosetting binders to meet the requirements of the American standards (ASTM C 665 and ASTM C 553) .

Burkani Rockwool Blankets produced with several thicknesses and densities up to 70 Kg/m. normally faced with vapor retarder aluminum foil.

Burkani Wired Blankets

Burkani Wired Blankets are flexible rolls mainly used for industrial sector for high temperature applications. The product is made out of molten mineral basalt rocks spun to fine fibers, bonded with slight amount of heat resistance binder and mechanically stitched wires to steel or stainless steel wire mesh.

Burkani Wired Blankets are flexible and can easily fit onto different geometries and surface structures.

Burkani Loose Wool

Burkani Loose Wool is manufactured by fiberizing molten basalt and limestone to produce fine fibers, then treated with water repellent emulsion oil, collected and used in loose shape, with the compliance of technical American standards (ASTM C 764).

Follow Us